I have taken the carb apart and cleaned it, but the adjustment is untouched. I do not believe the carb can cause the vibration, Please correct me if I'm wrong. I have checked and adjusted all parts on the ignition. I hope
The chain is actually noisy, but to me honest, I don't know if it is normal and how much noise is acceptable.
Post by suzsmokeyallan on Jan 21, 2009 17:14:26 GMT -5
Wow and its still running??? thats a serious leak and im surprised the rotor didnt lock up due to hydraulics of the water within the chamber. I can speculate that its possible the gaskets in the rotor unit have been compromised, if not somewhere else,, lets hope for that other lesser situation. What i can suggest is to pressurise the coolong system with low pressure air and listen for any escaping into the rotor unit housing. You should be able to hear it by listening into the exhaust port if its happening from the gaskets.
The official list.......... 68 Suzuki U 70 69 Suzuki T 500 MkII 72 Suzuki GT 750 cafe 74 project GTX-VR 75 Suzuki RE 5 76 Suzuki GT 750 81 Suzuki GSX 1100 88 Honda CR 500 RJ 93 Honda CBR 900RR 98 Suzuki GSF 1200 x 2 Bitsa GSF 1200 project
Right now the engine is removed from the frame, and taken apart. I have ordered new gaskets and some other parts from Sam, and while waiting for them I am cleaning and polishing the parts, and so on. The same time as I bought the bike, I bought a NOS wankel unit from Sam. I will use that one now, and later take the old one apart, to se what has happen with it. Last evening I found that the water pump is damaged. The former owner had put it together without gasket, only using liquid gasket. I believe it is why the flywheel look like it does.
Jess, if my English was better I would for sure call you, but it isn't but thank you very much. Everything I do at the bike at the moment is for the very first time, so the progress is a bit slow, but very interesting and educational. Jess, do you know if it is possible to change the bearing for the water pump. Se picture. Both the bearing and the shaft is dammaged.
I know it, it took long but today I started the new engine up for the very first time. It wouldn't start at the first try, but second with a little help from my cars battery, it started. Have a look.