|
Post by multistrada1 on Dec 9, 2022 19:03:50 GMT -5
I've worked with a few places that do this work and the results have been mixed. The gauges may look good but don't function correctly at times (needle fluctuation) or the faceplates age quickly. This guy has been doing this stuff for years and has the the tools and knowledge to do it right. If its a 1929 Harley or a RG500, Joe can do the job. Communicates well, evaluates and estimates. joellevinecompany.com/Speedo-Tach-Repair/Like a lot of us old bike guys, he is getting older and might not pass this business on, so take advantage while you can. Hope this helps.
|
|
|
Post by wayne on Dec 10, 2022 21:54:06 GMT -5
I believe I've heard of Joe and he's very good.
We have at least one in AU that'll do the A model style of gauge but very expensive (GT750 was $750 about 15 years ago so probably north of $1000). Very good work though, they come back like new.
Send me a PM for the Aussie guy's contact details if you need him. When I was last there, maybe 5 years ago, he was accumulating M model bits with the intention of offering services.
|
|