|
|
Post by oldtimer on Mar 4, 2021 13:59:42 GMT -5
Ok what oil filters fit or can be used without any problems. I can get genuine ones with a good discount but if there is a good alternative I’ll use it. Cheers malc
|
|
|
|
Post by wiznorton on Mar 4, 2021 15:02:17 GMT -5
I've just fitted a K&N HP-1003 as shown in link below:- www.ebay.co.uk/itm/HP-1003-K-N-OIL-FILTER-AUTOMOTIVE-KN-Automotive-Oil-Filters/381141052667There are cheaper makes, and I guess you could cross reference this to other brands. Appearance wise the K&N sticks out like a sore thumb being white, but that doesn't bother me to be honest. I imagine any of the genuine Suzuki filters are possibly N.O.S. and I think I'd rather go for something newly manufactured. I'm not sure how the internal elements might degrade over prolonged standing. |
|
|
|
Post by wayne on Mar 4, 2021 16:22:28 GMT -5
Depends where you are:
AU/NZ Ryco Z386, UK Royal Purple 10-2840, USA Toyota Corolla short can part no. 90915 03001, K&N HP-1003
|
|
|
|
Post by kanonkopdrinker on Mar 5, 2021 12:35:14 GMT -5
I have an email somewhere from the man himself (Sam Costanzo) in which Sam recommended me a Suzuki filter, part no. 06510-05A00.
I have been using these without any problem for years. He told me that the only thing they didn’t have was the emergency by-pass valve that the o.e. ones had, but as this only opened at some ridiculous pressure, it was as good as useless!!
They are black, against the o.e. silver.
David (UK)
|
|
|
|
Post by pmcburney on Mar 5, 2021 18:59:43 GMT -5
On this subject, does anyone have a used OEM filter they haven't thrown away yet?
I reckon the OEM filter outer casing is large enough to fit over the smaller AM filters (held in place with a magnet?) and could create the OEM look without the need to source one.
|
|
|
|
Post by timpa136 on Mar 5, 2021 19:56:55 GMT -5
On this subject, does anyone have a used OEM filter they haven't thrown away yet? I reckon the OEM filter outer casing is large enough to fit over the smaller AM filters (held in place with a magnet?) and could create the OEM look without the need to source one.
Tim |
|
