|
|
Post by ohiojoe on Mar 11, 2015 19:08:15 GMT -5
I am in need of radiator hoses. I could use a few of the reduction hoses that go from the radiator to the filler neck and a couple sets of the main hoses.. What is used for the small hoses. I am also interested in one small radiator hose clamp. A few of the chrome hose end covers would be nice.
My auto parts stores think I'm nuts…nothing comes close…except for using fuel line for the small hoses.
|
|
|
|
Post by timpa136 on Mar 12, 2015 10:36:22 GMT -5
Joe,
My local Kragen/O Reilly auto parts has bulk 1" radiator hose that works pretty well. The lower hose requires careful cutting and fitting as it is not naturally curved but not stiff truck type application for example. I can add a PIC at a later time.
Bottom line, I can help with that. The filler neck just requires two hoses put together, I have some left of the smaller size, I sealed the two with a sealer for insurance. New little 5.5mm clamps are still available from Suzuki, reasonable as well, Do you have a local shop?
For the hose , Look at my post for great radiator shop, I cautiously recommend the original appearing braided hose but it is 5.0mm
and is thicker than the original. Up side it should last for years, but assembling the original clamp requires patience. The clamp must be disassembled and slid back over the hose, Carefully slip the hose over while reinforcing the push. Next work the empty clamp back into position and reassemble the washer and screw over the spring. I'll look for a new dress cover for the Big hose. Timpa136
|
|
