|
Post by HGH 770N on Mar 11, 2013 12:49:34 GMT -5
I have had Stainless bars made , Copying the bars from my uk bike , they are 22mm Diameter x 2mm thick , I decided to go for Stainless bars I had to buy a complete length of 304 stainlless bar so i have some spare bars to sell. MSG if interested . Rog Attachments:
|
|
|
Post by HGH 770N on Mar 11, 2013 12:53:11 GMT -5
Seen here with my original bars above. Attachments:
|
|
|
Post by wayne on Mar 12, 2013 1:50:58 GMT -5
Ballpark, what sort of rise do these bars give you ?
Need something less than the stock RE5 cowhorns and something more than the inch risers on my GSX.
|
|
|
Post by ziggystardust on Mar 12, 2013 9:25:15 GMT -5
Wayne, I compared a U.K. M bar against a U.K. GT750 bar, the difference was so slight that I wondered why Suzuki went to the trouble to make a bar for the M.
Z
|
|
|
Post by wayne on Mar 12, 2013 23:36:18 GMT -5
Thanks Zee, gives me a reference point.
|
|
|
Post by HGH 770N on Mar 13, 2013 14:07:02 GMT -5
Dose this help Best Rog Attachments:
|
|
|
Post by wayne on Mar 13, 2013 14:59:23 GMT -5
Thanks Rog, that looks like a good compromise. I'll go and eyeball the two sets of bars I've got and compare.
|
|
|
Post by mike500 on Mar 13, 2013 17:34:46 GMT -5
the rise on my uk bike is about 4 inch and on my usa bikes its about 6 inch.hope that helps you wayne regards mike
|
|
|
Post by wayne on Mar 13, 2013 23:57:04 GMT -5
Thanks Mike. It puts it smack bang between my too low bars and too high bars.
I'll PM Rog.
|
|