|
|
Post by gwbarm on Oct 20, 2010 16:41:09 GMT -5
Does any one recognize this wire it was hanging loose, a left over from the PO. Attachments:
|
|
|
|
Post by gwbarm on Oct 20, 2010 16:44:43 GMT -5
The other side Attachments:
|
|
|
|
Post by steveuk on Oct 20, 2010 17:16:41 GMT -5
its the front brake light switch well part of it, screws to the underside of the master cylinder along with a plastic cover, spring, slide peice and contact.
steve
|
|
|
|
Post by gwbarm on Oct 21, 2010 10:07:26 GMT -5
Thanks Steve! I need to find a replacement. Also would this being unhooked cause the rear brake switch not to work, it doesnt work either.
|
|
|
|
Post by steveuk on Oct 21, 2010 10:56:28 GMT -5
the rear brake light should still work, check the bulb, little multi plug under the seat for the rear light, if i remember you can pull the 2 wires off the rear brake light switch and bridge them and the brake light should come on if so then the switch is faulty
steve
|
|
|
|
Post by mike500 on Oct 22, 2010 6:06:17 GMT -5
|
|
