|
Post by powersportser on Oct 15, 2021 16:14:52 GMT -5
Hey guys, so as you can see in the video if I have both points working, it only fires every other rotor face. If I pull the outer points apart, it sounds way better. I set points gap and timing per the manual and then was playing with the outer points and noticed the change, so needless to say they are not set correctly in the video.
|
|
|
Post by hudson on Oct 15, 2021 18:04:40 GMT -5
I would first try unplugging the wires from the vacuum switch behind the radiator. If that fixes it, then it's the vacuum switch that's stuck. If not then unplug the deceleration control relay under the gas tank.
Brian
|
|
|
Post by powersportser on Oct 19, 2021 19:36:42 GMT -5
Thanks for the tip. I unplugged the wires two wire connector for the vac switch and viola, problem solved. Thank you
|
|