Installing factory fairing

[dnaj]

OK. I want to install the Touring kit I got from Jess before he closed. Its all painted to match. Bags too! You shared the sticky thread and pictures. As to the fairing, my question is . . . muct one remove the headlight bucket on the M model or just the sealed beam? I'm guessing the bucket gets pulled to relocate the turn signals, which makes it kinda a pain to go back and forth. Thanks

[HGH 770N]

The original “M” headlight and chrome rim sits into the fareing, the use of 3 x 90 deg brackets are used from the rim fixing screw holes and bolts though into the fareing.
Access through inside the glove boxes.
Pm me if you need photos.
Regards
Rog

[wayne]

Headlight comes out. The bucket does not get removed. Just take out the blinkers and put a couple of bolts in to replace them to hold the bucket on.

You can see it in the photo below:

[timpa136]

Ah Ha,

A parts book kick starter

[dnaj]

Thank you. I just noticed. Looks like you relocated the rear turn signals too! Will I need to do that to install my factory bags. I do not have a luggage rack. How should I remount them if needed.

[timpa136]

dnaj said,

I do not have a luggage rack. How should I remount them if needed


My experience is with the Suzuki rack. I think there is a funky bracket of similar construction that must mount to the licence bracket but don't quote me. If I get this third party hosting thing figured out, I can post a picture.

Tim

[dnaj]

Do the GT750 luggage racks fit? They seem more around at the moment. Or I can try to find a good aftermarket.

[Jean-Denis]

No, GT 750 luggage rack don't fit.

[dnaj]

Thanks! Ill stay on the hunt!