|
Post by gt550guy on Nov 4, 2011 12:54:50 GMT -5
Does anyome have any tips on how to free up a lazy apex tip i have two that seem ok and one that is a little slow it seems to have 50psi on a compression test cold i cannot get it spinning fast enough with the kick start any ideas
|
|
FC Zach
3rd Gear
Eagleville, TN
Posts: 335
|
Post by FC Zach on Nov 4, 2011 16:49:25 GMT -5
Put a few squirts of ATF into the motor throught throught spark plug hole and rotate by hand every so often. When yo do start it, it will smoke like a freight train so don't be alarmed.
|
|
|
Post by gt550guy on Nov 4, 2011 17:45:53 GMT -5
the motor is apart i have the exhaust manifold off i can feel the tips with my finger 2 of them push in and out very well the third pushes in comes out a little slower i have been trying to do a leakdown test bui i am not sure how much pressure to put in the line
|
|
|
Post by sailor22 on Nov 15, 2011 6:52:02 GMT -5
I got my kit when the dollar was worth a bit more, and it only cost me $120 shipped from the US, for an 8 piece kit. Not bad at all. Probably cost a bit more now though.
The APEX adapter cost me another $30 after I tried it with the Tape Mod which was crap by the way. It works, but not as well as the proper APEX adapter.
|
|
|
Post by Al Corelli on Nov 15, 2011 9:56:35 GMT -5
Let it soak in ATF, it should loosen up.
|
|