|
Post by typ110 on Feb 20, 2017 4:29:20 GMT -5
In my spare time I am rebuilding NSU Ro80, Hercules W2000 and Suzuki RE5-engines. I can offer complete engine-rebuilds for forum-members. I have the tools, knowledge and spare parts to do so.
Here is how it works: send or bring me your unit. I will open it and assess the individual parts of the engine. From there, the engine-owner will decide how to rebuild the engine (new Ferrotic seals, Ceramic seals, double side seals, regrinding and hardening of the side houses, etc). However, if the engine is completely damaged inside, it will not be worth repairing and I will advise you if this is the case.
A rebuilt engine comes with a 1 year warranty.
I am located in Belgium and can be reached by sending me a Private Message (PM).
Greetings,
Michel
|
|
|
Post by Jess on Feb 20, 2017 13:23:03 GMT -5
Thank you for offering a valuable service to the community.
I wish you great success.
Best regards,
|
|
t140v
3rd Gear
Posts: 422
|
Post by t140v on Feb 22, 2017 17:27:34 GMT -5
Allthough i dont have a problem at the moment its nice to hear new seals and rebuilds are popping up here and there it can only prolong and increase the number of running rideable machines instead of them turning into museum pieces.
Regards Stuart
|
|
|
Post by snowrench on Mar 13, 2017 15:58:51 GMT -5
Or worse yet, being dismantled by some buffoon and parted on Ebay....
|
|
|
Post by HGH 770N on Mar 15, 2017 17:17:33 GMT -5
I had the task of rebuilding a unit that had been split by the unknown and supplied with corner seals missing and mazda oil seals .
|
|
|
Post by supersaki on Mar 15, 2017 17:27:41 GMT -5
Did you get your. PM Rog Regards Roy
|
|
|
Post by HGH 770N on Mar 15, 2017 17:39:59 GMT -5
Roy Check your PM
|
|
|
Post by HGH 770N on Mar 15, 2017 18:01:49 GMT -5
Built up now with good even compression but I have no paired up balance wheels to go with the unit .
|
|
|
Post by Grant on May 9, 2017 17:05:21 GMT -5
Hi Michel, My name is Grant from Brisbane Australia. I am interested in getting a proper unit rebuilt for my 1975 RE5. The engine in the bike runs, but is hard to start and blows a lot of smoke. I haven't ridden it for about a year for fear of doing terminal damage to it. I also have another complete engine that I have disassembled in the hope I might be able to rebuild one unit from the 2 (I rebuild Porsche engines as a side hobby) The spare engine has a broken fixed and rotating gear, but all else looks OK.
I wanted to know how much you charge for a rebuild, how long it would take and are you interested in the broken rotor for parts in exchange for a cheaper rebuild cost? If so let me know and I can ship the 2 proper units to you.
Thanks in advance
Grant grant.field@Hotmail.com
|
|
|
Post by timpa136 on May 9, 2017 17:20:53 GMT -5
The spare engine has a broken fixed and rotating gear
I'm guessing that is an early m model as the stationary gear was addressed early on in production.
|
|
|
Post by re5rotary on May 10, 2017 1:09:18 GMT -5
Hi Grant as per the other post I may be able to help you from New Zealand regards terry
|
|
|
Post by typ110 on May 10, 2017 14:39:15 GMT -5
Hi Grant,
will send you an email:-)
Michel
|
|
|
Post by junkyarddog on Sept 14, 2019 5:19:26 GMT -5
In my spare time I am rebuilding NSU Ro80, Hercules W2000 and Suzuki RE5-engines. I can offer complete engine-rebuilds for forum-members. I have the tools, knowledge and spare parts to do so.
Here is how it works: send or bring me your unit. I will open it and assess the individual parts of the engine. From there, the engine-owner will decide how to rebuild the engine (new Ferrotic seals, Ceramic seals, double side seals, regrinding and hardening of the side houses, etc). However, if the engine is completely damaged inside, it will not be worth repairing and I will advise you if this is the case.
A rebuilt engine comes with a 1 year warranty.
I am located in Belgium and can be reached by sending me a Private Message (PM).
Greetings
Michel
|
|
|
Post by junkyarddog on Sept 14, 2019 5:20:39 GMT -5
hi michel could you please send me pm regarding engine rebuilds ? thanks
|
|
|
Post by junkyarddog on Sept 15, 2019 8:36:47 GMT -5
Hi, Anyone know where i can get hold of the rotor side seals ? thanks
|
|