Indicator post lenght

[rotarym]

Hi to all
Could someone give me the measurement of the lenght of the indicator post from the edge where the shaft goes into unit and the fork ear as my A model has little stubs and I can machine some up. The rest I can work out and add to this lenght.At the moment they are about 20 mm or is this right as photos of this model show them spaced out similar to the M model distance.
Regards Kerry

[Jess]

The post without studs (threaded portion) is 10CM... or therabouts...

Best

[rotarym]

Hi
Thanks Jess that,s all i need and will start making some up.
Regards Kerry

[Jess]

Kerry,

M are 10cm... I think I misread your post.

Do you need to know The measument for an A?

They are different

Sorry to be obtuse

[redbug2]

I cut mine out of stainless. They were tough to drill with the stainless work hardening.... By going with stainless I did not have to have them plated.

Before and after

[raychappo]

I made replacements for all 4 out of aluminium then polished to a high shine

[andouilleman]

If you don't want to take the time to machine them check with Stuart Knox on the re5 owners forum he machined me some out of stainless and drilled the holes threw the center and put the proper ends for both the A and M bikes models on them. He made them out of stainless and hi speed polishes them till they look like chrome. I think he does a great job at making them. I'm not a machinest so I didn't have the tools to do them myself . His prices where very reasonable also. Hope this help.
Mr. Jess may also have some nos ones . It can't hurt to ask him.
Have a great day!

[rotarym]

Hi
I need the lenght for the A model with the indicators the same as as the GT 750.
Kerry

[Jess]

I will get that info for you tomorrow when I am out in the warehouse.

Best

[Jess]

A model front indicator stems are 2.6 inches for the exposed shaft. The threaded bits obviously are not included.

Hope that helps.

Best,

[rotarym]

Hi Jess
Thanks ,will now make some thanks.
Kerry