|
Post by HGH 770N on Jun 23, 2016 15:18:30 GMT -5
I have on test a re manufactured needle jet , to replace those chewed up ones out there. They have been made as a push/tap in fit and should not need loktite ones fitted in the correct position . If they are ok the cost for time and tooling for them to be made would equate to aprox £60 . please list here or PM any interest and I will put it to the manufacturer . As most of you know the jet DOSE NOT have a part number and not shown it the parts or workshop manual as it was a factory fit originally .
|
|
|
Post by Glenn RE5 on Jul 10, 2016 14:21:39 GMT -5
Great news ..will order a few for stock ..always the part missing on the Carb ....
|
|
|
Post by h2e Al In Aus on Jul 12, 2016 1:22:30 GMT -5
I would take 2for sure ,just for spares urs Al
|
|
|
Post by HGH 770N on Jul 15, 2016 15:51:50 GMT -5
I have some needle jets with me now. I have push fitted the one shown with out lock tight , I just knocked it in with flat screwdriver , PM me for price with shipping . I have needles also if needed
|
|
|
Post by HGH 770N on Jul 15, 2016 15:57:52 GMT -5
|
|
|
Post by wayne on Jul 26, 2016 0:08:48 GMT -5
Hi Roger,. A PM was sent a while ago re cost and post to AU and how to pay. Haven't heard back yet.
Thanks, Wayne
|
|
|
Post by HGH 770N on Jul 28, 2016 17:32:41 GMT -5
Postage charge . Australia £11.05 Canada £ 10.95 USA £ 10.95 NZ £11.95 UK AND EU please ask for quote These quotes are for air freight post with insurance and tracked in small Jiffy (bubble parcel ) I wouldn't want them lost . Regards Rog
|
|
|
Post by HGH 770N on Aug 20, 2016 13:09:11 GMT -5
I have some freshly made jets ready to ship. PM me or email me with your needs.
|
|