dnaj
1st Gear
Posts: 67
|
Post by dnaj on Apr 3, 2015 9:38:52 GMT -5
Just got my tanks back from paint, finally! Rebuilt my petcock with a kit from Jess's. The kit comes with four washers, two that have rubber seals in them. Guessing all four are used with the sealing washer on the inside, two washers for each bolt? Assuming the forging is correct, I have no washers for the fuel sensor, and they look to use a smaller size. What goes there?
|
|
dnaj
1st Gear
Posts: 67
|
Post by dnaj on Aug 17, 2016 14:36:49 GMT -5
Nobody answered this, but I just now found an exact crossover replacement for the sealing washers for the fuel sensor, which are smaller than the ones used on the petcock. Posting here for posterity. Someday, someone may need the same solution, its Yamaha Part no. 90430-06218
|
|
|
Post by wayne on Aug 17, 2016 23:19:42 GMT -5
Thanks dnaj. I've pinched your info and posted into the FAQ petcock repair thread with credit to you.
|
|