|
Post by economy5 on Dec 7, 2014 17:46:48 GMT -5
Well since I'm no rocket scientist on this forum I can only hope it ends up in the right thread.
I would realy like to contacted and put on the list for a ELECTRONIC IGNITION from Jess. I don't watch this forum enough so if some one could contact me with info. I would appriciate it. I would even make a deposit if needed. Mike Bowlin Indianola,Iowa economy5@aol.com Thanks All Mike
|
|
|
Post by wayne on Dec 8, 2014 4:04:50 GMT -5
Mike- I don't believe that Jess is keeping a list.
He will post a message on the board when he has them ready to go and you can then put your hand up for one. Also re read his post on page 1 of this thread and you'll get an idea of the time scale he's working on. It won't be next week or next month.
Cheers, Wayne
|
|
si
1st Gear
Posts: 6
|
Post by si on Dec 16, 2014 15:42:48 GMT -5
Would like one of each as well. thanks si.
|
|
|
Post by cresco750 on Dec 27, 2014 16:46:31 GMT -5
|
|
|
Post by jchid on Jan 1, 2015 21:19:10 GMT -5
count me in for a cdi and check valve....
|
|
|
Post by rotarym on Jan 6, 2015 8:30:53 GMT -5
I'll be in for an ignition unit to as i inquired about one before you shut the doors ,will wait for your thread . As Wayne said If you're still going to be making parts, hijack away..................
|
|
|
Post by timpa136 on Jan 22, 2015 12:18:37 GMT -5
I Just ordered the metering pump hose to the carb check valve.... another GT-750 SRIS hose part. 09352-20503-600 $5.23 timpa136 If you are ordering the check valve from Jess, best to replace the hose, too.
Cool site for the emblems, cresco
|
|
|
Post by timpa136 on Jan 23, 2015 14:29:30 GMT -5
I will try to post 2 pictures of one of my radiators. I highly recommend this shop in Fontana, Ca. They fabricate, repair and do fantastic work, Hope I can post these pictures. The 5.5 mm nipple was corroded off, they suggested this repair with the banjo bolts and Suzuki clamps, all currently available and it performs flawlessl y. Timpa136
|
|
|
Post by timpa136 on Jul 11, 2015 16:21:05 GMT -5
Just checking with you folks, is anybody using fuel tank petcocks from another GS-line-up? Any interest as I am reviewing my notes from 199? and new petcocks are cheaper than some corroded bits listed on e-bay.
Timpa136
|
|