quawk
2nd Gear
Posts: 150
|
Post by quawk on Nov 3, 2021 9:38:17 GMT -5
I removed the port valve cover and confirmed that the cables and the lever that they turn both are moving freely. I was also able to get a small inspection mirror down the intake tube and see the actual PV butterfly was moving and returning to the closed position. I will recheck the timing the next time I'm in the shop. In an earlier post you suggested draining the carb by removing the 12mm brass plug bolt. I assume you are referring to the jet cover plug. Will this actually drain the bowl because it doesn't appear to be a drain plug per se?
|
|
|
Post by HGH 770N on Nov 3, 2021 16:53:11 GMT -5
The 12mm (jet) plug bolt underneath the float bowl when removed will drain float bowl .
|
|