|
Post by tom93gts on Oct 30, 2019 22:55:39 GMT -5
Does anybody have an exploded diagram of how the different layers of this go together? Or can tell by looking if it's together correctly? I took mine apart, cleaned it up, and reassembled but I feel that something isn't right. Also, how do I know if it's doing its thing correctly? When all assembled I can blow/suck through the vacuum line on top, but it seems maybe it should operate more like a 1 way valve? Thanks! Tom Edit: Looking at the picture it doesn't look like I did a very good job cleaning it up, but you should have seen it before! haha
|
|
|
Post by goandy on Oct 31, 2019 4:51:01 GMT -5
Oops picture not working! (978)
|
|
t140v
3rd Gear
Posts: 422
|
Post by t140v on Oct 31, 2019 10:06:18 GMT -5
Does anybody have an exploded diagram of how the different layers of this go together? Or can tell by looking if it's together correctly? I took mine apart, cleaned it up, and reassembled but I feel that something isn't right. Also, how do I know if it's doing its thing correctly? When all assembled I can blow/suck through the vacuum line on top, but it seems maybe it should operate more like a 1 way valve? Thanks! Tom Edit: Looking at the picture it doesn't look like I did a very good job cleaning it up, but you should have seen it before! haha Go to re5rotary.proboards.com/thread/379/re5-parts-service-manuals-online then look at carb diagram Regards Stuart
|
|
|
Post by tom93gts on Oct 31, 2019 14:32:55 GMT -5
Oops picture not working! (978) How about now? Hopefully I got it sorted out.
|
|
|
Post by tom93gts on Oct 31, 2019 14:33:58 GMT -5
Awesome! Thank you!
|
|
|
Post by timpa136 on Oct 31, 2019 16:43:23 GMT -5
I see the illustration now. I would expect that vacuum nipple (sorry Andy) to hold vacuum with a vacuum pump. That is your power valve but instead of a richer fuel jet it runs the fuel thru a richer/smaller air jet enrichening the mixture at higher speeds
Tim
|
|
|
Post by goandy on Oct 31, 2019 18:36:42 GMT -5
I would expect that vacuum nipple (sorry Andy) Tim Haha you must know me better than I thought...
|
|