|
Post by allen on Feb 18, 2018 5:20:28 GMT -5
Ok got the whine from the CDI back and the starter working,
In short checked a lot of wires for continuity and continuity through connectors. Dismantled starter button and kill switch and tested and found all ok. Disconnected and tested ignition switch and found that difficult not knowing what I should see on the multi meter and test light on each wire. Disconnected and reconnected connectors several time during testing. After seeing different results with the multi meter and test light around the starter kill switch harness connector and disconnecting and connecting it several times during testing it all came good. So I think it was a dry dirty connector in the starter kill switch harness connector. I will start it up tomorrow after work. Thanks all for your help.
I would still appreciate a wiring digram by email if any one can help.
|
|
|
Post by Jean-Denis on Feb 18, 2018 7:11:57 GMT -5
|
|
|
Post by allen on Feb 22, 2018 4:15:59 GMT -5
Thanks for all your help everybody it's running again. Regards Allen
|
|